Recommended for use as a filler and sealer coat for blacktop pavements such as home driveways. Easy-to-stir. Fills surface cracks up to 1/8 IN. Dries to the touch in approximately 4 hours. Can be driven on in 24 to 48 hours under normal conditions. Coverage is 250 to 500 sq. ft. per 5 gallon pail depending on roughness of surface. Coverage may vary according to surface age and porosity, climate conditions when applying, and method of application. 4 year warranty. 5 gallon container.
Smooths, preserves, and protects weathered asphalt driveways. Use only on unsealed blacktop at least 1 year old. This product should not be applied to surfaces previously sealed with coal tar, latex, or acrylic driveway sealer. Rich, semi-gloss finish protects against UV damage. Coverage: 60 to 80 sq. ft. per gallon. 4 year warranty. 5 gallon container.
An asphalt emulsion based sealer designed to beautify and protect your driveway. Optimum PRO will leave a deep black color while providing strength and flexibility with its advanced polymer system. Fiber reinforced for maximum strength. Latexite Optimum PRO is a no-stir product making it easy to apply. Nonskid formula with FASS-DRI. Low VOC formula. Easy soap and water clean-up. Optimum is recommended for all condition driveways but works especially well on driveways that have been sealed many times before. The titanium additive helps create a strong bond between the old and new coat. Optimum also contains FASS DRI, which allows the sealer to dry in as little as 60 minutes on a nice day. Coverage: Smooth and previously sealed driveways will average 400 to 500 sq. ft. per pail. Rough and unsealed surfaces will average 300 to 400 sq. ft. per pail. 8 year warranty. 5 gallon container.
Excellent nonfibered coating for exterior, below-grade walls and abutments. Durable - provides a dampproof coating on exterior masonry surfaces. Easy-to-use. Will not run or sag. Designed for use on stone brick or concrete and as an underground exterior foundation coating and dampproofer. Apply by brush or spray equipment. 5 gallon covers approximately 400 to 500 sq. ft. on poured concrete and 250 to 400 sq. ft. on concrete block. Do not apply if there is a threat of rain within 24 hours after application.
Excellent nonfibered coating for exterior, below-grade walls and abutments. Durable - provides a dampproof coating on exterior masonry surfaces. Easy-to-use. Will not run or sag. Designed for use on stone brick or concrete and as an underground exterior foundation coating and dampproofer. Apply by brush or spray equipment. 5 gallon covers approximately 400 to 500 sq. ft. on poured concrete and 250 to 400 sq. ft. on concrete block. Do not apply if there is a threat of rain within 24 hours after application.
The ultimate in convenience for small jobs. Black light-bodied, asphalt based material designed for priming surfaces prior to the application of hot-mopped or cold-applied asphalt coatings, roof cements and asphalt-based roof and flooring adhesives. It´s highly penetrating qualities help assure a firm, tough bond. Can be used on metal edging, flashing, weathered composition roofing, concrete, and masonry surfaces (prior to use of solvent-based asphalt coatings or adhesives), Gypsum surfaces (prior to use of solvent-based asphalt coatings or adhesives), and roof surfaces prior to application of Ruftac or other SBS self-adhering membrane. Surface must be clean, dry, and free of moisture as well as grease and oil. 17 oz. spray can size complies with Air Quality Management District regulations. Meets requirements of ASTM D-41, and Federal Specification SS-A-701B. Coverage: 33 sq. ft. per can.
A Portland cement-based, heavy-duty powder that is specially formulated to form a hard impervious surface that waterproofs, seals, and protects below-grade exterior walls constructed of concrete (poured or block), stone, or masonry. Use for parge coat instead of regular cement. Also, excellent for coating drinking water holding tanks or cisterns, birdbaths, foundations, crawl spaces, exterior above-grade or interior basement and garage walls. Unlike ready-mixed paints that can only be applied to dry surfaces, it is made to be used on damp walls. It also reduces radon gas penetration. Color: Gray. 45 lb. pail, covers up to 600 sq. ft.
A Portland cement-based waterproofing coating for sealing, protecting, and decorating vertical walls constructed of concrete, masonry, brick, or stucco. Just add the powder to water. For previously painted or nonporous surfaces use Damtite Bonding Liquid model No. 05160 or 05370. It eliminates dampness and resists mildew, flaking, or chalking while beautifying and sealing all pores and voids. Unlike ready-mixed paints that can only be applied to dry surfaces, it is made to be used on damp walls. Safe for coating drinking water holding tanks or cisterns, birdbaths, and fountains. Reduces radon gas penetration through concrete block walls. Color: White.
No. 01071: 7 lb. pail, covers up to 93 sq. ft. No. 01211: 21 lb. pail, covers up to 280 sq. ft. No. 01451: 45 lb. pail, covers up to 600 sq. ft.
Use to clean and prepare old or new concrete block, brick, poured concrete, stucco, stone, and tile walls prior to painting. Properly prepares surface prior to painting by cleaning and etching the surface. It removes and neutralizes salt-like, powdery deposits (efflorescence), mortar stains, and oil residue from forms. Just add water and stir. An alternative to muriatic acid. Coverage: 12 oz. will cover approximately 300 sq. ft. when mixed with 1 gallon water; 150 sq. ft. with 1/2 gallon water.
Commercial grade, polyurethane construction sealant for sealing cracks, construction joints, doors, windows, siding, roofing, gutters, sills, thresholds, basements, vents, skylights, wall penetrations, and precast panels. Superior adhesion to most common building materials including concrete, wood, brick, aluminun steel, glass, tile, marble, stone, and etched PVC. Seals out radon gas. Permanently elastic, cures to a tough, durable, flexible consistency with exceptional resistance to cutting, tearing, aging, and weathering. Will not harden or shrink. Paintable, sandable, and stainable after cure. Meets or exceeds Federal specifications TT-S-00230C, Type II, Class A; ASTM C-920, Type S, Grade NS, Class 25. (1) 10.1 oz. cartridge yields 24 linear ft. of adhesive in a 1/4 IN bead. Fresh adhesive clean up immediately. Old adhesive clean up with paint thinner to other approved solvent. 10.1 oz. cartridge.
No. 90618: White No. 90957: Black No. 107839: Colonial white No. 107840: Capital tan No. 90959: Limestone No. 90958: Dark bronze No. 90629: Aluminum gray
